Flashing & Ridge Capping Repair In The Yarra Valley
Most roof leaks don't start in the sheets — they start at flashings, ridge capping and penetrations, where the roof is joined and sealed. We re-seal and replace these trouble spots across the Valley so the water stays out and your ceilings stay dry.
Rated 5/5 based on 13+ reviews.
Where Leaks Really Start
Flashings around chimneys, walls and valleys, plus ridge capping and vent penetrations, are where roofs are joined and sealed. That's exactly where they tend to fail.
Cracked pointing, lifted capping and perished sealant let water straight in even when the sheets are perfect — and it tracks along the roof before it drips, so the damage inside is often nowhere near the fault.
- Leaks around chimneys, flues and skylights
- Cracked or missing ridge capping pointing
- Lifted or loose flashings
- Perished sealant at roof penetrations
A Watertight Roof Without Re-Roofing
You get a watertight roof again without the cost of replacing it. We find where the water is actually getting in, then re-bed and re-point the ridge capping, replace failed flashings and strip and re-seal the penetrations properly rather than smearing silicone over the top.
On a sound roof that's usually the whole difference between a dry ceiling and a leak that keeps coming back — and if we find the sheets are gone too, we'll say so plainly.
- Ridge capping re-bedded and re-pointed
- Failed flashings replaced
- Penetrations and vents re-sealed
- Targeted fix without re-roofing
Homeowners On Our Work
- Jessica JohnsHome Owner
Daniel was excellent to work with, responsive, punctual and very reasonable with pricing. Daniel did a great job with our roof, external vents and flashings for our fireplace.
Google - Pietro SciottoHome Owner
Highly recommend Daniel with roofing repairs. Always on time with high quality work and good attention to detail.
Google - Gail LaveryHome Owner
Daniel and crew were punctual and kept us informed throughout the work on our roof. We were very pleased with the result.
Google
Need A Roof Plumber In The Yarra Valley?
Contact us today to speak directly with Daniel, your local roof plumber. We'll talk through your roof, gutters or repair job and arrange a time for a free inspection and quote.
- Phone 0457 886 444
- Email valleypr@outlook.com
- Servicing Yarra Valley & Surrounds
Frequently Asked Questions
Flashing is the metal that seals the joins in your roof, around chimneys, walls and valleys. Because these are the weak points, most leaks start there when the flashing or sealant fails.
Yes. Leaks around chimneys, flues, vents and skylights are common and usually come down to flashing. We re-flash and re-seal them so they stay watertight.
Often, yes. If the sheets are sound and the leaks are coming from the capping, re-bedding and re-pointing it fixes the problem without a full re-roof.
Yes. The Yarra Valley is our home base, but we also work across the Yarra Ranges, Cardinia and Maroondah. Get in touch and we'll confirm we can reach you.


